This new formula of silver metal clay fires to .999 fine silver. It features a really long working time. You will be amazed at how it picks up the smallest of details. The shrinkage rate of approximately 25% allows for even more detail in final piece. It is the best clay for Silhouette CAMEO® cutting. Last but not least it is the best priced silver clay on the market. You cannot torch fire but if you have a kiln your going to love this clay.
While this clay is great for pendants, beads,earrings etc. because of shrinkage rates we would not recommend for rings.We have listed it not to replace Art Clay or PMC but simply to offer a more affordable product that artists can work with in a specific niche.
Each 100g pack contains 100g of .999 Silver. Total weight with binder is 125 grams
1.Dry on hotplate or toaster oven(max 250f/120c)
2.Fire in kiln at 1600f for 30-90mins
**Please Note: Clay may seem rock hard in packaging before first use. This is due to vacuum process. Please lubricate palms and work ball of clay for few minutes in rolling motion. It will turn soft and pliable. Do not add water.
Click here for Printable Instructions
Instructions for using Metal Magic Silver Clay
Metal Magic Silver Clay combines microscopic particles of silver with water and a nontoxic organic binder to create a material that can be worked with as easily as modeling clay. Objects can be made with simple tools that are then dried and heated in a small kiln. This drives off the water, burns away the binder and fuses the silver particles into solid metal.
Tools for shaping Metal Magic Silver Clay include rubber stamps, cookie cutters, children’s toys and many other household items like pens, playing cards, toothpicks and combs. A piece of plastic or glass makes a convenient waterproof work surface. Metal Magic Silver Clay does not stain or harm these tools. Clean up with soap and water. Avoid aluminum foil and aluminum tools because they can damage Metal Magic Silver Clay. Each person has their preferences, but a typical work setup includes a plastic sheet, a rolling pin, a small dish of water and assorted hand tools, Work on any stable surface with adequate lighting
Metal Magic Silver Clay is ready to use directly from package. Keep your silver clay tightly wrapped until you are ready to use it. Pull off exactly what you need to work with and wrap the rest in plastic and return to package. This is to prevent premature drying of clay. Apply a thin layer of olive oil to your hands and tools before starting. This will help prevent clay from sticking to you or your tools. Avoid drafts or hot lamps, as this will dry the clay you are working with quicker. Components can be cut, textured, layered and shaped to any form limited only by your imagination. Use water and slip to seal joints and smooth surfaces but take care to not use too much. Most artists do their work while the clay is soft and pliable but some choose to refine after it is dry but before it is fired. Dry silver clay can be sanded, filed and carved similar to model makers wax. When the moisture and organic binder is removed during firing it shrinks proportionately. Set aside your finished pieces to dry. If you are in a rush or just lack the patience a hair dryer, hot plate or toaster oven will help. A toaster oven should be set to 175degres F for about 20 minutes for most items. Make sure when cleaning up your work area to add a few drops of water to your open pack of silver clay and wrap back in plastic to insure it doesn’t dry up before its next use. Make sure to collect scraps and sand dust from your silver clay items, as it will make a great slip when you collect enough. This is done simply by sifting scraps and dust through fine kitchen sifter and adding water to desired consistency.
1. Fully dry your piece in toaster oven or hotplate
2. Place in kiln for 90 minutes at 1600f/843c
After firing, Metal Magic Silver Clay is a pure silver .999. In this form it can be drawn, sawn, filled, soldered, enameled and drilled. Use conventional jewelry tools and materials. Work can be burnished, tumbled or any other conventional meaning for polishing and finishing.